Ground Spiral Bevel Gear
Spiral Bevel Gears Ground After Heat Treatment, for Higher Accuracy, Lower Noise and Higher Speed Than Lapped Sets.

Specifications
| Business Established | 2015 |
|---|---|
| Nature | Manufacturing |
| Maximum Gear Diameter | Up to 1200 mm |
| Module Range | Module 1 to 25 |
| Maximum Face Width | Up to 150 mm |
| Ratios | As per drawing and requirement |
| Cutting, Lapping and Grinding | Available in-house under one roof |
| Accuracy References | DIN, AGMA and customer-specific requirements |
| Quantities | Prototype through production |
| Reverse Engineering | Available |
What Grinding Changes
Case-hardened bevel gears distort slightly in heat treatment. There are two ways to deal with it. Lapping runs the gear and pinion together with an abrasive compound, improving their contact as a pair. Grinding removes the distortion from every flank, restoring the tooth form to the designed geometry.
Ground gears therefore reach tighter accuracy classes, run more quietly at speed, and can be made interchangeable, so a replacement member fits an existing ground mate.
When to Choose Ground Gears
- High pitch-line speeds, where errors turn into noise and vibration
- Precision drives with a specified accuracy class
- Heavily loaded sets, where an accurate flank form spreads load evenly
- When spare members must be interchangeable
For slower industrial drives, a lapped set is often the more economical choice. We can advise which route suits your speed and accuracy requirement.
Our Grinding Route
Gears are cut, case hardened to the specified depth and hardness, then ground in-house. We check tooth contact, runout and backlash after grinding, and record the hardness. Size range: up to 1200 mm diameter, module 1 to 25, face width up to 150 mm.
See also: hardened spiral bevel gears and precision spiral bevel gears.
Frequently Asked Questions
Is grinding more expensive than lapping?
Yes, it takes more machine time. It is worth it when speed, noise, accuracy class or interchangeability require it.
Can a lapped set be converted to ground?
Not usually. Grinding is planned from the start, with the stock allowance left on the teeth before heat treatment.
Do ground gears need a matched mate?
Ground members made to the same geometry can be interchangeable, which is one of the main reasons to grind.
Is a ground set always more accurate than a lapped set?
Grinding corrects each flank after heat treatment and gives the tighter accuracy classes, and ground gears can be interchangeable. Lapping improves the contact and noise of a matched pair, which is enough for many drives. The required class decides.
Can you give an inspection report with the gears?
Yes. We record runout, contact pattern, backlash and hardness for each set, and can include other checks agreed at the order stage.
Do precision gears need special mounting?
They need the mounting distance, shaft alignment and bearing preload the gears were checked at. Precision gears in a worn housing will not run as precision gears.
Related Products
Spiral Bevel Gear
Custom Spiral Bevel Gears and Matched Gear-and-Pinion Sets Up to 1200 mm Diameter and Module 25, Cut.
View details →Bevel Gear
Straight, Spiral, Zerol, Hypoid and Miter Bevel Gears Made to Drawing, Sample or Application Data, Up to 1200 mm Diameter.
View details →Straight Bevel Gear
Straight Bevel Gears for Slower Right-Angle Drives, Valves, Hand-Operated Machinery and Simple Gearboxes.
View details →Request a Quote for Ground Spiral Bevel Gear
Share your drawing, sample details, quantity and delivery location. Our engineering team will review it and reply.