Miter Gear
Miter Gears: Pairs of Identical Bevel Gears with a 1:1 Ratio That Turn the Drive Through 90° Without Changing Speed.

Specifications
| Business Established | 2015 |
|---|---|
| Nature | Manufacturing |
| Maximum Gear Diameter | Up to 1200 mm |
| Module Range | Module 1 to 25 |
| Maximum Face Width | Up to 150 mm |
| Ratios | As per drawing and requirement |
| Cutting, Lapping and Grinding | Available in-house under one roof |
| Accuracy References | DIN, AGMA and customer-specific requirements |
| Quantities | Prototype through production |
| Reverse Engineering | Available |
What Makes a Gear a Miter Gear
A miter gear pair is a pair of bevel gears with the same number of teeth on both members, usually on shafts at 90°. The ratio is 1:1: the drive changes direction but keeps the same speed and torque. Both members have a 45° pitch angle.
Miter gears can be straight bevel or spiral bevel. In a spiral bevel miter pair the two gears look alike but have opposite hands of spiral, one left-hand and one right-hand, so they are not interchangeable with each other.
Where They Are Used
- Turning a line shaft or conveyor drive through a corner
- Splitting one input into two outputs in multi-way bevel gearboxes
- Indexing tables, packaging lines and special-purpose machines
- Agricultural and material-handling drives
What We Make
Straight and spiral miter gears, with plain, keyed, splined or hubbed bores, from small precision pairs to large gears up to 1200 mm diameter, module 1 to 25. For high speed or low noise, choose spiral miter gears, ground if required.
Frequently Asked Questions
Are both gears in a miter pair the same part?
For straight miter gears, often yes. For spiral miter gears, no: one is left-hand and one right-hand.
Can miter gears be used for shaft angles other than 90°?
A 1:1 pair at another angle is possible, but it is then an equal-ratio bevel pair rather than a true miter pair. State the angle and we will make it.
Do you make miter gears for multi-way gearboxes?
Yes, sets of three or four gears for two- and three-way bevel boxes.
Related Products
Spiral Bevel Gear
Custom Spiral Bevel Gears and Matched Gear-and-Pinion Sets Up to 1200 mm Diameter and Module 25, Cut.
View details →Bevel Gear
Straight, Spiral, Zerol, Hypoid and Miter Bevel Gears Made to Drawing, Sample or Application Data, Up to 1200 mm Diameter.
View details →Straight Bevel Gear
Straight Bevel Gears for Slower Right-Angle Drives, Valves, Hand-Operated Machinery and Simple Gearboxes.
View details →Request a Quote for Miter Gear
Share your drawing, sample details, quantity and delivery location. Our engineering team will review it and reply.